Friday, 4 September 2015

HOW TO FLASH SPECTRUM PHONES AND CLONE PHONES USING SPD UPGRADE TOOL


Procedure
 
Download SPD UPGRADE TOOL


1. Open the Research download tool > bin folder

2. Launch ResearchDownload.exe

3. Click on the Load Packet icon (top left corner)

4. In the window that pops up, navigate to the location of the .pac file, select it then click Open

5. The pac file should now be loaded (its name should appear at the top)

6. Click the Settings Icon (top left corner)

7. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files

8. Click the Start downloading button

9. You should see Waiting.... under the Progress bar

10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt

11. Once flashing is complete, you'll see Passed

12. Click on the Stop downloading icon then disconnect the phone from PC and boot





Procedure
1. Open the Research download tool > bin folder
2. Launch ResearchDownload.exe

[Image: how-to-use-research-download-tool-1.jpg]
3. Click on the Load Packet icon (top left corner)

[Image: how-to-use-research-download-tool-2.jpg]
4. In the window that pops up, navigate to the location of the .pac file, select it then click Open

[Image: how-to-use-research-download-tool-3.jpg]
5. The pac file should now be loaded (its name should appear at the top)

[Image: how-to-use-research-download-tool-4.jpg]
6. Click the Settings Icon (top left corner)

[Image: how-to-use-research-download-tool-5.jpg]
7. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files

[Image: how-to-use-research-download-tool-6.jpg]
8. Click the Start downloading button

[Image: how-to-use-research-download-tool-7.jpg]
9. You should see Waiting.... under the Progress bar

[Image: how-to-use-research-download-tool-8.jpg]
10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt

[Image: how-to-use-research-download-tool-9.jpg]
11. Once flashing is complete, you'll see Passed

[Image: how-to-use-research-download-tool-10.jpg]
12. Click on the Stop downloading icon then disconnect the phone from PC and boot

[Image: how-to-use-research-download-tool-11.jpg]
- See more at: https://forum.hovatek.com/thread-1231.html#sthash.lLDd2ZSf.dpuf
Procedure
1. Open the Research download tool > bin folder
2. Launch ResearchDownload.exe

[Image: how-to-use-research-download-tool-1.jpg]
3. Click on the Load Packet icon (top left corner)

[Image: how-to-use-research-download-tool-2.jpg]
4. In the window that pops up, navigate to the location of the .pac file, select it then click Open

[Image: how-to-use-research-download-tool-3.jpg]
5. The pac file should now be loaded (its name should appear at the top)

[Image: how-to-use-research-download-tool-4.jpg]
6. Click the Settings Icon (top left corner)

[Image: how-to-use-research-download-tool-5.jpg]
7. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files

[Image: how-to-use-research-download-tool-6.jpg]
8. Click the Start downloading button

[Image: how-to-use-research-download-tool-7.jpg]
9. You should see Waiting.... under the Progress bar

[Image: how-to-use-research-download-tool-8.jpg]
10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt

[Image: how-to-use-research-download-tool-9.jpg]
11. Once flashing is complete, you'll see Passed

[Image: how-to-use-research-download-tool-10.jpg]
12. Click on the Stop downloading icon then disconnect the phone from PC and boot

[Image: how-to-use-research-download-tool-11.jpg]
- See more at: https://forum.hovatek.com/thread-1231.html#sthash.lLDd2ZSf.dpuf
Procedure
1. Open the Research download tool > bin folder
2. Launch ResearchDownload.exe

[Image: how-to-use-research-download-tool-1.jpg]
3. Click on the Load Packet icon (top left corner)

[Image: how-to-use-research-download-tool-2.jpg]
4. In the window that pops up, navigate to the location of the .pac file, select it then click Open

[Image: how-to-use-research-download-tool-3.jpg]
5. The pac file should now be loaded (its name should appear at the top)

[Image: how-to-use-research-download-tool-4.jpg]
6. Click the Settings Icon (top left corner)

[Image: how-to-use-research-download-tool-5.jpg]
7. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files

[Image: how-to-use-research-download-tool-6.jpg]
8. Click the Start downloading button

[Image: how-to-use-research-download-tool-7.jpg]
9. You should see Waiting.... under the Progress bar

[Image: how-to-use-research-download-tool-8.jpg]
10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt

[Image: how-to-use-research-download-tool-9.jpg]
11. Once flashing is complete, you'll see Passed

[Image: how-to-use-research-download-tool-10.jpg]
12. Click on the Stop downloading icon then disconnect the phone from PC and boot

[Image: how-to-use-research-download-tool-11.jpg]
- See more at: https://forum.hovatek.com/thread-1231.html#sthash.lLDd2ZSf.dpuf

6 comments:

  1. thanks sharing

    check latest version for SPD upgrade Tool
    SPD upgrade Tool

    ReplyDelete
  2. phone cant show.while i instail all driver which is required.

    ReplyDelete
  3. STUPID china mobile phone... this is very hardtools that i have found...

    ReplyDelete