HOW TO CHANGE IMEI OF AN MTK DEVICE

After rooting and generating a valid imei. Proceed to change the imei of an Mtk device

Requirements
 MTK Droid Tools
Android ADB Driver
(Make sure you write down your Original IMEI and keep it safe).

STEPS TO CHANGE IMEI USING MTK DROID TOOL

1 .Extract and run MTKDroidTools.exe as an Administrator

2. Plug in the phone and wait for droid tools to detect the phone.Once phone information have been detected, IMEI will show.

3. Click the ROOT button so that it will temporary have Root shell access on the
phone in order for it to make the script work on the background. The color will change from yellow
to green. It will prompt this window to gain root shell access.Once you have the root shell access click the IMEI/NVRAM button and a new window will show.

4. Now all you need to do is put your 15 Digits IMEI Number you generated earlier

Note: IMEI 1 DENOTES SIM 1 AND IMEI 2 DENOTES SIM 2. So change accordingly
Then Press the
REPLACE IMEI. Aprompt comes up requesting you replace the existing imei.
ACCEPTand reboot the phone after this.

STEPS TO CHANGE IMEI WITHOUT PC
(MTK ENGINEERING)

1.Download MTK Engineering mode for your device

2.Open/Lunch the MTK Engineering Mode on your phone.

3.Click/Select MTK Settings.

4.Navigate left to Connectivity.

5.On the connectivity panel, select CDS Information.

6.On the CDS section, select Radio Information.

7.Now, select either the Phone1 or Phone2, depending on which SIM you wish to change its IMEI.

8.On this page, click on the AT+. About four (4) options should be presented to you, just choose
either of this options below:

AT+ EGMR=1,7,"" for  Phone 1
AT+ EGMR=1,10,"" for Phone 2
Now put the IMEI you wish to change to in between this signs " " above.

9. Now, tap/click the Send AT Command option.

Now reboot your phone and dial *#06# to check your IMEI number