HOW TO USE BROADCOM MULTIDOWNLOADER TO FLASH FIRMWARE

These are the instructions on how to use Broadcom MultiDownloader Tool to flash stock firmware on any Android Device with a broadcom chipset.

HOW TO :

1: DOWNLOAD and extract Broadcom MultiDownloader Tool and Drivers.

2: Install the USB Drivers.

3: Power Off the Android Device.

4: Download the Android Device Stock Rom and extract the contents.

5: Open Broadcom MultiDownloader.exe.

6: Once Broadcom MultiDownloader Tool is launched, Click on Settings and select the Configuration.
7: Under Configuration define the firmware path and select the firmware folder.

8: Once the firmware has been successfully attached in Broadcom MultiDownloader tool, click on Apply button to continue.

9: Power off and Connect the Android Device to the Computer while holding Volume UP and DOWN.

10: Once Android Device has been successfully added.

11: Click on the Start All Button to begin the Flashing Process.

12: Once Flashing is completed, a Green OK Status will be seen.

13: Done.