HOW TO USE READ & WRITE TOOL TO FLASH IMEI ON MTK, SPREADTRUM AND QUALCOMM CHIPSETS

These are the instructions to flash or write IMEI on Qualcomm,
MTK, SpreadTrum devices using Read&Write Tool.

Battery should be atleast 50 percent

DOWNLOAD and Extract Read&Write Tool on your computer.
Open WRTool.exe

Open Settings by Clicking on File > Config 

Now, under PlateformConfig select the Device Chipset Type


Under ComPort select USB.
Under DataFileConfig choose BP and AP file from your
device stock firmware file (both file comes with the mediatek stock
firmware and if you dont have mediatek device then you dont have to add the BP and AP file).

If its a dual SIM device then select the IMEI1 and
IMEI2 then Click on OK to continue.
Write the IMEI in the IMEI1 and IMEI2 Box respectively.

Click on Write to begin the Write or Flash Process.
Usually Writing IMEI takes a minute to complete. Once
IMEI writing is done you will see green Pass message.

HOW TO READ n UNLOCK PATTERN LOCK MTK DEVICES WITHOUT FACTORY RESET USING MIRACLE BOX

How to unlock MTK devices locked with Pattern Lock without Factory Reset.

This tutorial will show you how to read and unlock the pattern lock of any MTK device without factory reset it.

DOWNLOAD and Install MT65XX driver.
DOWNLOAD Miracle Box.

Launch Miracle Box
Click MTK Tab
Click Unlock/Fix
Tick Read Pattern
Click Start Button
Turn off device and connect to PC using USB
Miracle Box will detect device
Wait for few seconds for Miracle Box to analyse the pattern of the device.

Done, the process is complete
The Pattern code will be displayed in numbers.
Input according to the 3X3 matrix input on the device
Example: 125789
You will draw the pattern from dot 1 to 2 to 5 to 7 to 8 to 9

HOW TO RESUME EXPIRED AND FAILED DOWNLOAD IN Uc BROWSER

Ever faced with the situation where you are downloading a 1.5gb file on a slow network with a 2gb data plan, all for the download to reach 1.2gb and fail.

If so, then i believe you know how frustrating it can be.
But, the good news is, if you are on Uc browser, there is hope and you can recover and resume the download.All you have to do is to follow the steps below

STEPS
1. Open file manager and go to UCDownloads folder.
2. Cut that file and .dltemp extension file of same name.
3. Paste them in any other folder.
4. Open UC Browser, hold that file and get details of that file, copy the file url.
5. Delete that file from Ucweb download manager, open that url and download again.
6. Let it download upto 300 kb and then pause the download.
7. Exit UC Browser and open file manager, goto UCDownloads folder delete that file with .dltemp extension of same name.
8. Cut the previous file with .dltemp file and paste it to UCDownloads folder.
9. Now open UC Browser and resume download.

10. Done